New Updated Spider Farmer S-Station | Wi-Fi & Bluetooth , Smart Plug Controller 1875W 15A for Indoor Growing, Supports Temperature & Humidity Sensor-Based Automation, for Digital Devices Connection and Smart Control via Spider Farmer APP

The Spider Farmer S-Station is an intelligent device management tool that allows users to remotely control and manage growing equipment via the Spider Farmer app(The S-Station does not support connecting to the GGS Controller or GGS AC5/AC10 Power Strip). Once connected to Wi-Fi and Bluetooth, you can set the operating time of the device, and it will automatically sync with network time. Remote operation is also supported. After setting your environmental target thresholds, you can choose the control mode that best suits your needs.

Advanced Smart Control

• Grow Schedule Customization
  Supports advanced Planting Plan Setting. Choose from preset templates or create fully customized schedules to automate your growth cycle.
• Smart Environment Control
  The GGS S Station enables automated control of key grow equipment such as fans, inline fans, heaters, humidifiers, and dehumidifiers with RJ12 connectivity. Monitor and manage your grow tent anytime via the Spider Farmer app.
• Smart LED Light Control
  Compatible with Spider Farmer SF Series (excluding SF300 and SF600), G Series, and SE Series LED grow lights. Set lighting schedules, adjust brightness, and simulate sunrise/sunset transitions (e.g., gradual ramp-up from 8:00–8:30 AM and dimming from 7:30–8:00 PM). Supports both Bluetooth and Wi-Fi control.
• Smart Fan & Inline Fan Control
  Precisely control clip fans and RJ12 inline fans, including on/off timing, standby speed, and oscillation angle. Natural wind simulation supported.
• Humidifier & Dehumidifier Automation
  Control operating schedules, operating cycles, intervals, and operating levels to maintain optimal humidity for plant growth.
• Heater Smart Control
  Set precise schedules, operating cycles, and power levels to maintain ideal temperature conditions.

Available Basic Control Modes Include:

1. General Device Mode

After connecting to Wi-Fi or Bluetooth, users can remotely turn the outlet on/off, suitable for basic device control.

2. Timer Period Mode

The simplest timer mode, ideal for scheduling on/off times for your devices. You can set 12 operating stages (Stages 1–12) with adjustable run times from 00:00 to 23:59, and select the days of the week (Monday–Sunday) for operation.

3.Time Loop Mode

Set a start time (any point between 00:00 and 23:59), followed by the duration the device will be on (adjustable between 00:00:00 and 23:59:59), then set the off-time (also adjustable between 00:00:00 and 23:59:59). The on/off cycles can repeat 1 to 99 times, with the total cycle duration (on time + off time + number of cycles) not exceeding 24 hours.

For example, if a device starts at 8:00 with a 10-minute on time and 50-minute off time, repeating 3 times, the device will run from 8:00 to 8:10, then shut off for 50 minutes, repeating this cycle until 10:00.

4.Inline Fan (Blower) Mode

Automatically controls the fan based on your set temperature or humidity values. You can prioritize either temperature or humidity.

5.Humidification / Dehumidification Mode

Automatically controls a humidifier or dehumidifier to maintain the desired humidity range based on the set target.

6.Heater / Cooler Mode

Automatically turns a heater or cooler on or off to maintain a comfortable temperature based on your target temperature.

7.CO2 Injecting Mode

Automatically turns the CO2 injection device on or off to reach your set CO2 target (requires Sensorpro kits with a CO2 sensor).

8. Exhaust Fan Mode

Automatically turns the exhaust fan on or off based on the set CO2 target (requires Sensorpro kits with a CO2 sensor).

9. Drip Irrigation Mode

Triggers irrigation based on target thresholds set for substrate conditions and moisture levels. Supports up to 12 drip irrigation time periods with built-in safety protection. (Requires a soil sensor, sold separately.)

Important Notes:

Sensors Required for Certain Modes:
Inline Fan Mode, Humidification Mode, Dehumidification Mode, Heater, and Cooler Mode require the GGS Temp/Humi Sensor.
CO2 Injecting Mode and Exhaust Fan Mode require the GGS CO2 Sensor.
Devices with Built-In Sensors:

If your device already includes built-in sensors (e.g., Spider Farmer heaters, humidifiers, dehumidifiers), you won’t need to purchase additional sensors.

Who Is This For?

The S-Station is ideal for users who want to control a single device via the Spider Farmer app, particularly in the following situations:

Single Device Control

If you own only one Spider Farmer or another brand of device and don’t need a multi-port power strip (e.g., GGS Power Strip), the S-Station is the perfect solution.

Compatible with GGS Pro Controllers

Supports connection to the GGS Pro Controller for expanded control. Ideal for grow rooms or managing.

Does It Support Remote Control?

The S-Station supports remote control via Wi-Fi and Bluetooth, allowing users to turn devices on or off and view real-time energy consumption data via the Spider Farmer app.

Note: The current version does not support tracking cumulative energy usage data.

Port and Connector Overview

The S-Station has two ports for connecting devices:

Left Port (IR Transmitter Port)

This port is specifically designed for controlling air conditioning units. Users can wirelessly control multiple brands of AC units via this port. The IR transmitter is expected to be released in Q2 2026.

Right Port (Device Port)

This port is for connecting external sensors or the GGS Pro controller to expand the S-Station’s control capabilities.

Note: The S-Station does not support connecting to the GGS Controller or GGS AC5/AC10 Power Strip via the RJ12 port. It is designed to be used as a standalone basic smart plug.