Spider Farmer Drip Irrigation System for Plants with Water Pump, 8 Drip Emitters, and GGS AC5 Power Strip Kit for Smart Watering Control

Sorry, this kit does not include a pot; you can purchase our planting bags.

Dear customer, you can refer to the following methods:
Mode & Sensor: Set Socket to Drip Irrigation; choose single/averaged soil sensor.Schedule: Enable a Period slot, set Start/End times.Triggers: Set Trigger Value (starts pump), Target Value (stops pump), and Dosing Duration (runtime).Interval: Set Interval Time to let water soak into roots before re-evaluating.Logic: Pump waters when moisture $\le$ trigger value, then pauses for interval, repeating until target moisture is reached.

Of course, this is entirely possible; you can simply enable drip irrigation mode.

Hi there! Here is the step-by-step guide to setting up your GGS AC10 controller and soil moisture sensor to trigger the drip irrigation pump automatically:1. Hardware ConnectionPlug your 25W drip irrigation pump into one of the AC10 outlets (e.g., Socket #1).Insert the 3-in-1 Soil Sensor firmly into the root zone of your pots.2. Select Operating Mode & Sensor in AppOpen the Spider Farmer App and navigate to the specific outlet where your pump is plugged in (e.g., Socket #1).Change the Operating Mode to Drip Irrigation.Under Soil Sensor, link the 3-in-1 soil sensor monitoring your pots.3. Configure Moisture Triggers & RuntimesEnable an active period slot (e.g., Period 1) and configure the following parameters:Trigger Value: Set your minimum moisture threshold (e.g., 30%). When the sensor detects pot moisture at or below this percentage, it automatically triggers the pump to turn ON.Target Value: Set your desired moisture level (e.g., 45%). The system stops watering once this level is reached.Dosing Duration: Set the runtime for each pump burst (e.g., 2 minutes) to control how much water/nutrient is delivered per cycle.4. Set Soak & Evaluation IntervalSet the Interval Time (e.g., 10 minutes).Why this is important: After a watering burst, the system pauses for this duration to allow water to fully diffuse and saturate throughout the pot's substrate before taking another reading.How the Automation Works$$\text{Soil Moisture} \le \text{Trigger Value} \longrightarrow \text{Pump ON (Dosing Duration)} \longrightarrow \text{Wait (Soak Interval)} \longrightarrow \text{Re-evaluate}$$The AC10 sensor continuously monitors your pot’s real-time soil moisture.When moisture drops below your set Trigger Value, the AC10 automatically turns on the pump for the specified Dosing Duration.The pump pauses for the Interval Time to let water soak in.The sensor re-evaluates the soil. If it's still below your Target Value, it repeats the cycle. Once the target moisture is reached, it automatically stops.Have fun growing!